RW-CD laesst sich nicht loeschen
Jörn Eisenkrätzer
aed at aed-dresden.de
Tue Apr 20 08:31:42 CEST 2004
Hallo,
habe keine Erfahrung mit RW-CD's und wollte dies aendern ;-)
Der Versuch des Loeschens von CD-RW (Octron) verlief erfolgkos,
auf meinem Vobis-Laptop mit Mandrake 9.1.
Nach negativen Versuch in gcombust und K3b - nun das Ergebnis der Konsole:
----------------------- schnipp --------------------------------
[root at ion joern]# /usr/bin/cdrecord -v -pad speed=1 dev=0,0,0 blank=all
Cdrecord-Clone 2.01a18-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly at mandrakesoft.com>.
Note: The author of cdrecord is not to be bothered with problems in this version.
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'QSI '
Identifikation : 'CDRW/DVD SBW-241'
Revision : 'VX09'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x000A
Profile: 0x0010
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1605632 = 1568 KB
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -12900 (97:10/00)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 48
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Manufacturer is unknown because of the orange forum embargo.
As the orange forum likes to get money for recent information,
it may be that this media does not use illegal manufacturer coding.
Starting to write CD/DVD at speed 4 in real BLANK mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Performing OPC...
Blanking entire disk
/usr/bin/cdrecord: Input/output error. blank unit: scsi sendcmd: no error
CDB: A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 9600s
/usr/bin/cdrecord: Cannot blank disk, aborting.
----------------------- schapp -------------------------------
Habe es dann noch - erfolglos - mit der -force-Option probiert ...
Viele Gruesse Joern
More information about the Linux
mailing list